{"product_id":"bds-suspension-1727fs-8-inch-lift-kit-w-4-link-ram-2500-19-24-4wd-diesel-fox-2-0-performance-shocks","title":"BDS Suspension 1727FS - 8 Inch Lift Kit w\/ 4-Link Ram 2500 19-24 4WD Diesel Fox 2.0 Performance Shocks","description":"\u003cp\u003eGo big with the BDS Suspension engineered 8-inch lift kit with 4-Link conversion for your 2019-2024 RAM 2500 diesel powered truck. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 40 inch Tires.\u003c\/p\u003e\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks. At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied.\u003c\/p\u003e\u003cp\u003eIn the rear, careful consideration was taken to design the system for load carrying capacity, handling, and ride quality. To do this, BDS engineered new coil bucket seats to mount them outboard the frame rail similar to a leaf spring style truck. The new upper and lower coil seats require only minor drilling for mounting hardware. The new position allows for a much shorter and more stable coil spring design. This virtually eliminates any chance of coil bowing and ensures the coils react predictably throughout the full range of travel.\u003c\/p\u003e\u003cp\u003eIn addition to the coil springs\/mounts, a new track bar relocation system is included to properly set the rear roll-center height and center the axle under the vehicle. The rear track bar relocation\u003c\/p\u003e\u003cul\u003e\u003cli\u003eIncludes a new heavy duty adjustable track bar. Finishing out the rear this kit utilizes extended sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e4-Link Conversion\u003c\/p\u003e\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1\/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\u003cp\u003ePro-Ride Coil Springs\u003c\/p\u003e\u003cp\u003eA pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\u003cp\u003eSteering Correction\u003c\/p\u003e\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront Lift Method: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Coil Springs\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 8 inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 6 inch\u003c\/li\u003e\n\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003eAftermarket driveshaft is required\u003c\/li\u003e\n\u003cli\u003eFor use on diesel models only\u003c\/li\u003e\n\u003cli\u003eFits rear coil sprung models only (will not fit air-ride models)\u003c\/li\u003e\n\u003cli\u003eThis kit requires the use of an aftermarket front driveshaft (not provided) in addition to the (provided) indexing ring kit - BDS122624 (6-bolt). Both must be installed, however due to variations between truck configurations we recommend installing the kit prior to taking measurements for the aftermarket front driveshaft to ensure correct length. Vehicle can be driven without front driveshaft. Kit was tested with a Drive Line Plus flange and driveshaft, however other high angle driveshaft options can be used\u003c\/li\u003e\n\u003c\/ol\u003e\u003cul\u003e\n\u003cli\u003eHeavy duty 4-link arms improve strength, handling and caster control\u003c\/li\u003e\n\u003cli\u003eHigh strength progressive rate coil springs for a great ride on any terrain\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation brackets to re-position axle\u003c\/li\u003e\n\u003cli\u003eForged drop pitman arm to correct steering angles\u003c\/li\u003e\n\u003cli\u003eFront sway bar correction to maintain handling performance\u003c\/li\u003e\n\u003cli\u003eHD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts\u003c\/li\u003e\n\u003cli\u003eBDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFOX 2.0 Performance Series\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (Internal Floating Piston) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTire Size: 40 x 13.5 Wheel Diameter: 20 x 9 Back Spacing: 5.5\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes one BDS012434, 2019-2024 Ram 2500 \/ 2019-2024 Ram 3500 4-Link Box Kit - 2 of 2, UPC Code 658848612444\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS012627, 2019-2024 Ram 2500 6 inch Rear Box Kit, UPC Code 658848612833\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS012811, 2019-2024 Ram 2500 \/ 2019-2024 Ram 3500 8 inch 4- Link Front Box Kit 1 of 2, UPC Code 658848612901\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS032619, 2014-2024 Ram 2500 Rear 6 inch Coil Box Kit, UPC Code 658848616435\u003c\/li\u003e\n\u003cli\u003eIncludes two BDS032802, 2013-2024 Ram 3500 8 inch Front Coil-Diesel (Single Coil Only), UPC Code 658848616459\u003c\/li\u003e\n\u003cli\u003eIncludes one BDS122624, 2019-2024 Ram 2500 \/ 2019-2024 Ram 3500 T-Case Index - 6 Bolt - Diesel, UPC Code 658848619764\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224754, Fox 2.0 Shock 29.85 x 18.25 x 2- S50\/EB1\u003c\/li\u003e\n\u003cli\u003eIncludes two FOX98224763, Fox 2.0 Shock - 30.05 x 18.5 x 2- Special\/EB1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\n\u003ch4\u003eWarranty\u003c\/h4\u003e\u003cp\u003eLifetime Replacement Warranty Extends to Cover all BDS Hard Parts\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAnodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":45524733919276,"sku":"BDS1727FS","price":4205.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/6007\/6332\/files\/bds_ram_1727H_1003f48d-6e19-489e-adbd-898c6c09d1e8.jpg?v=1779201107","url":"https:\/\/carpartglobal.com\/products\/bds-suspension-1727fs-8-inch-lift-kit-w-4-link-ram-2500-19-24-4wd-diesel-fox-2-0-performance-shocks","provider":"Car Part Global","version":"1.0","type":"link"}