Products

This 4" system is designed to lift your Ford Super Duty. 4" front leaf springs provide room for 35” tires. This system uses a custom progressive pack for ultimate ride quality, while providing 4" of lift. This system comes with a 1.75" bump stop...

Engineered to provide consistent steering damping with a through-shaft design, the ICON Centerline Steering Stabilizer eliminates the common push/pull sensation associated with traditional steering stabilizers. Developed with a wide range of aftermarket Jeep components in mind, this stabilizer features a high clearance design that...

This Edelbrock Stainless Steel Braided Fuel Kit #8122 connects mechanical fuel pumps with 1/2" NPT outlets to Edelbrock Fuel Pressure Regulator Kits. Made of the highest quality materials. Pre-assembled hose with hose ends. Attributes: Brand Name: Edelbrock GTIN: 00085347081226 Color: Silver Inside Diameter: 0.343...

This 3.5 inch Bump Stop Spacer Kit is used to prevent an 8 inch Suspension System from over compressing. If your suspension were to over compress you could negative arc your springs, causing fatigue and premature sag, as well as bottom out your shocks...

Bilstein B8 5165 Classic remote reservoir shock absorbers are designed to be used on custom off-road vehicles in order to achieve the desired ride of your light truck or SUV. These high gas pressure monotube shock absorbers are sold by various lengths and valve...

Bilstein B8 5160 Classic remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers...

This Edelbrock fuel pressure regulator #174053 is machined from aircraft quality aluminum for those who demand the best. This carbureted fuel pressure regulator has an internal diaphragm made of fluorosilicone to ensure high temperature protection resulting in an extended life. This Edelbrock fuel pressure...

Edelbrock part #41144 aluminum coil covers and lid are designed for 2010-14 Camaro SS equipped with an Edelbrock supercharger part #1597 or #1598. Our kit is geared towards those with competition versions of the supercharger kits, which do not include coil covers, but would...

Edelbrock part #41113 aluminum coil covers are designed for the 2005-10 Chrysler HEMI's with an Edelbrock supercharger. Our kit is geared towards those with competition versions of the supercharger kit, which do not include coil covers, but would like to add them on. Covers...

Edelbrock part #41142 aluminum coil covers are designed for 2010-13 Camaro SS with an Edelbrock supercharger. Our kit is geared towards those with competition versions of the supercharger kits, which do not include coil covers, but would like to add them. Covers are designed...

Edelbrock part #41143 aluminum coil covers are designed for 2010-15 Camaro SS with an Edelbrock supercharger. Our kit is geared towards those with competition versions of the supercharger kits, which do not include coil covers, but would like to add them. Covers are designed...

Edelbrock part #41114 aluminum coil covers are designed for 2011-14 Chrysler HEMI's with an Edelbrock supercharger. Our kit is geared towards those with competition versions of the supercharger kit, which do not include coil covers, but would like to add them on. Covers are...

The Edelbrock supercharger Stage 1 part #158360 is designed for use with 2018 Ford F150 With Gen III DI/PI 5.0L Coyote engine and 10-Speed Auto trans. The core of this system is the Eaton Gen VI 2650 TVS rotating assembly with a four-lobe design...

Edelbrock part #15791 is a supplemental fuel system containing a replacement fuel pump, fuel injectors and a fuel level sender. This upgrade kit is ideal for GM Trucks utilizing the #1579 Edelbrock Supercharger System. It will only fit 07-09 6.0L and 07-08 6.2L Crew/Extended...

Edelbrock part #15672 is a Supplemental Fuel Pump Kit is required for GM trucks and SUV's utilizing #1567 Edelbrock Supercharger Systems. Locate your Vehicle Identification Number (VIN). Verify if your vehicle requires a supplemental fuel system upgrade. If digit 8 of your VIN (Engine...

Edelbrock Coil Cover Kit #41149 is intended for the 2018-19 Ford Mustang 5.0L GT equipped with an Edelbrock R2650 supercharger. This kit includes a set of cast aluminum covers that can replace the covers that are included with Edelbrock supercharger kits #15382, #153820, #15388...

The Edelbrock 1728 fuel pressure regulator is machined from aircraft quality aluminum for those who demand the best. Edelbrock EFI fuel pressure regulators have an internal diaphragm made of fluorosilicone to ensure high temperature protection resulting in an extended life. They are compatible with...

Edelbrock fuel pressure regulators #174042 are machined from aircraft quality aluminum for those who demand the best. These EFI fuel pressure regulators have an internal diaphragm made of fluorosilicone to ensure high temperature protection resulting in an extended life. They are compatible with all...

Edelbrock part #4204 Elite Series Short "Push-In" Breather is a die cast breather that will fit all existing Elite Series valve covers. The "push-in" mounting style is ideal for low-profile and center bolt Elite Series valve covers because they do not have internal clearance...

The Edelbrock #9642 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Hard-chromed valve stems are 11/32" except where noted. Vehicle Specific Chrysler:Big-Block B-Series:383 (6.3L)/400 (6.6L) Chrysler:Big-Block RB-Series:413 (6.8L)/426 (7.0L)/440 (7.2L) Attributes: Brand Name: Edelbrock GTIN: 00085347096428...

These air filter elements from Ford Racing are the same filters as those used in Ford Racing cold air induction kits. The filters are constructed from multi-layer high performance cotton gauze that traps more dirt and has less restriction than traditional paper filters. Ford...

Ford Racing remote filter adapters are designed to allow you to install a remote mounted oil filter and oil cooler. These adapters are made using top-quality billet aluminum and include mounting hardware. Allows Installation of Remote Oil Filter Attributes: Brand Name: Ford Performance Parts...

a recent European study identified Mustang as the most desirable classic car in Europe. Motorsports continue to evolve, with advances in technology and greater demand for smaller powertrains, as well as growing appetite for new formats like Rally Cross and Drifting. How it develops...

Attributes: Brand Name: Ford Performance Parts GTIN: 00756122003121 Extended Information: Country of Origin: US Emissions : Emissions Compliance Exempt Life Cycle Status: Available Only While Supplies Last Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 8 x 4.5 x 4.5 inches Weight:...

4 in. chrome-plated stainless steel tips. Uses Stock hangers and mounts. Factory exhaust pipe must be cut to install clamp on Ford Performance axle back mufflers. Unique Designed/Tuned To Provide Optimum Performance Unique Designed/Tuned To Provide Aggressive Sound/Durability Pure Driving Excitement Our Most Aggressive...

4 in. black chrome-plated stainless steel tips. Uses Stock hangers and mounts. Factory exhaust pipe must be cut to install clamp on Ford Performance axle back mufflers. Unique Designed/Tuned To Provide Optimum Performance Unique Designed/Tuned To Provide Aggressive Sound/Durability Pure Driving Excitement Manufactured in...

Ford Performance Sport Exhaust systems are uniquely designed and tuned to provide optimum performance, aggressive sound, durability, and pure driving excitement. Manufactured in the USA from high quality 304 stainless steel. Features ultra-smooth mandrel bends, warp-free flanges and superior craftsmanship. Bolts to stock catalytic...

The Ford Performance Raptor Chase Rack In-Bed Tire Carrier is an add-on unit designed to work with Raptor Chase Rack/Roof Rack M-19007-B. It allows for storing up to a 40 in. tire on an angle, leaving room for storage underneath. Made of high quality...

Coil Covers Quick And Easily Installation Significant Improvement In Under Hood Appearance Made To Withstand Extreme Under-Hood Temperatures Includes Covers And Attachment Hardware Attributes: Brand Name: Ford Performance Parts GTIN: 00756122013021 Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life...

4 in. black chrome-plated stainless steel tips. Uses Stock hangers and mounts. Factory exhaust pipe must be cut to install clamp on Ford Performance axle back mufflers. Unique Designed/Tuned To Provide Optimum Performance Unique Designed/Tuned To Provide Aggressive Sound/Durability Pure Driving Excitement Our Most...