Products

Edelbrock part #8080 Brass Hose Fitting is a 1/4-18" NPT fitting with a 3/8" barb. This Fitting will fit the rear vacuum port of all Edelbrock four-barrel carbs. Vehicle Specific Chrysler:Big-Block RB-Series:413 (6.8L)/426 (7.0L)/440 (7.2L) Attributes: Brand Name: Edelbrock GTIN: 00085347080809 End 1 Attachment...

Edelbrock part #1158 Brass Fuel Fitting for the Edelbrock 94 carburetor is a great way to plumb your vintage carburetor fuel system. This Brass Fuel Fitting contains a brass 3/8" hose fitting and a gasket. The fitting is threaded to 1/2"-20 and as such,...

The Edelbrock 94 #1160 Carburetor Jets .049" Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94's and its later variations. Jets sold in pairs. Attributes: Brand Name: Edelbrock GTIN: 00085347011605 Grade Type: Performance Head Diameter: 0.312 Length: 0.352 Material:...

Edelbrock part #8089 Banjo Fitting is designed for Edelbrock Square-Bore & Carter AFB Carburetors. Attributes: Brand Name: Edelbrock GTIN: 00085347080892 End 1 Attachment Type: Banjo End 1 Diameter: 5/8-20 End 2 Attachment Type: Smooth Hose End 2 Size: 3/8 Finish: Natural Material: Brass Quantity:...

The Edelbrock 94 #1157 Carburetor Jets .048" Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94's and its later variations. Jets sold in pairs. Attributes: Brand Name: Edelbrock GTIN: 00085347011575 Grade Type: Performance Head Diameter: 0.312 Length: 0.352 Material:...

The Edelbrock 94 #1161 Carburetor Jets .050" Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94's and its later variations. Jets sold in pairs. Attributes: Brand Name: Edelbrock GTIN: 00085347011612 Grade Type: Performance Head Diameter: 0.312 Length: 0.352 Material:...

The Edelbrock 94 #1162 Carburetor Jets .051" Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94's and its later variations. Jets sold in pairs. Attributes: Brand Name: Edelbrock GTIN: 00085347011629 Grade Type: Performance Head Diameter: 0.312 Length: 0.352 Material:...

The Edelbrock 94 #1163 Carburetor Jets .052" Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94's and its later variations. Jets sold in pairs. Attributes: Brand Name: Edelbrock GTIN: 00085347011636 Grade Type: Performance Head Diameter: 0.312 Length: 0.352 Material:...

The Edelbrock 94 #1164 Carburetor Jets .053" Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94's and its later variations. Jets sold in pairs. Attributes: Brand Name: Edelbrock GTIN: 00085347011643 Grade Type: Performance Head Diameter: 0.312 Length: 0.352 Material:...

The Edelbrock 94 #1165 Carburetor Jets .053" Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94's and its later variations. Jets sold in pairs. Attributes: Brand Name: Edelbrock GTIN: 00085347011650 Grade Type: Performance Head Diameter: 0.312 Length: 0.352 Material:...

Edelbrock #1469 EPS And Thunder Series AVS Float kit (Includes Two Floats, Two Pins And A Float Setting Gauge) Attributes: Brand Name: Edelbrock GTIN: 00085347014699 Center Hung Floats: No Material: Brass RGL: WARNING: This product can expose you to Lead, which is known to...

Edelbrock part #8078 Brass Hose Fitting For S/B Chrysler Intakes is a single barb coolant hose fitting. The fitting has a 1" single barb nipple and 3/4-14 NPT threads on the opposite end. The fitting is perfect for any coolant port bypass that needs...

Edelbrock part #12415 Fuel Bowl Inverted Flare Fitting is a 3/8" inverted flare fuel inlet fitting. The fitting is designed for use with Holley 2300, 4150, 4150HP and 4160 (center hung floats only), 4500, 4500HP and Rochester Quadrajet applications up to 1974. The fitting...

HPS 350 Series Hose End Fittings for PTFE hoses are reusable however the olive inserts are single use. Replacement olive inserts are a cost-efficient way to reutilize an old PTFE hose end at a fraction of the cost of a new fitting. These olives...

HPS 350 Series Hose End Fittings for PTFE hoses are reusable however the olive inserts are single use. Replacement olive inserts are a cost-efficient way to reutilize an old PTFE hose end at a fraction of the cost of a new fitting. These olives...

Edelbrock part #8096 Vacuum Adapter Fitting is a low profile elbow that is designed to provide clearance for Holley and other carbs with a rear fuel bowl that extends over the vacuum port tap in most intake manifolds. Machined from solid brass. Attributes: Brand...

Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage. Attributes: Brand Name: Edelbrock GTIN: 00085347014651 Material: Brass Quantity: Set of 2 RGL: WARNING: This product can expose you...

Edelbrock part #3577 Regulator Fitting is a -6 AN fuel inlet fitting is for use with fuel mounted regulators that come included with all Pro-Flo EFI systems. The fitting will screw directly onto the fuel rail mounted fuel regulator and provide you with a...

The Edelbrock #1498 are replacement Needles and Seats for all Edelbrock square-bore carburetors Attributes: Brand Name: Edelbrock GTIN: 00085347014989 Material: Brass Quantity: Set of 2 RGL: WARNING: This product can expose you to Lead, which is known to the State of California to cause...

Edelbrock part #8090 Inverted Flare (3/8) Fuel Fitting for Edelbrock Square-Bore & AFB Carbs. The fitting comes with a sealing washer and has 5/8-20 threads. This fitting is standard on the E.P.S. marine carburetors, 1409 and 1410. Attributes: Brand Name: Edelbrock GTIN: 00085347080908 End...