Products

Edelbrock Part #15828 Edelbrock Competition Air Intake kit provides the increased airflow needed for 2010 Mustang GT racing applications. It includes a high flow Mass airflow Sensor, 7.85in. long reusable open element filter, plastic shroud and all necessary hardware for installation. Vehicle Specific Ford:Modular...

Edelbrock Competition Air Intake Kit #15868 is designed for use on 2015-2017 Ford Mustangs with the Edelbrock Supercharger kit and modular inlet. This intake kit features a sealed airbox design with a fresh air inlet that reduces restriction at the front of the supercharger...

The Edelbrock supercharger Pro-Tuner system part #1587 is designed for use with 2010 Ford Mustang applications with the 4.6L 3V engine. The Edelbrock competition supercharger is based off of our street supercharger kit but is paired down to the essential components that a racer...

Edelbrock Part #15808 Edelbrock Competition Air Intake kit provides the increased airflow needed for 2005-09 Mustang GT racing applications. It includes a high flow Mass airflow Sensor, 7.85in. long reusable open element filter, plastic shroud and all necessary hardware for installation. Vehicle Specific Ford:Modular...

Edelbrock Part #15898 Edelbrock Competition Air Intake kit provides the increased airflow needed for 2011-14 Mustang GT racing applications. It includes a high flow mass air flow Sensor, 7.85in. long reusable open element filter, plastic shroud and all necessary hardware for installation. Vehicle Specific...

The Edelbrock Carburetor Adaptor #2693 competition adapter re-locates Q-Jet carbs 5/16" to the rear for improved fuel distribution on square-bore single plane intake manifolds. Attributes: Brand Name: Edelbrock GTIN: 00085347026937 Gasket Or Seal Included: Yes Height: .750 Material: Aluminum Quantity: Kit RGL: WARNING: This...

Edelbrock Air Intake System #15811 is a competition-style kit designed for 2015-2020 Mustang Supercharger kits with the modular inlet. This intake kit increases airflow by reducing restriction in front of the supercharger inlet. A larger 113mm mass airflow housing increases the range of the...

Edelbrock part #5794 Sure Seat Valve Spring Kit is designed for Small-Block Chevy O.E Cast Iron Heads. Made of highest quality spring wire and precision wound to close tolerances. This Sure Seat Valve Spring set is for use on original equipment heads when installing...

Edelbrock part #5795 Sure Seat Valve Spring Kit is designed for 396-402-427-454 V-8 Big-Block Chevy O.E Cast Iron Heads. Made of highest quality spring wire and precision wound to close tolerances. This Sure Seat Valve Spring set is for use on original equipment heads...

Edelbrock part #5894 Sure Seat Valve Spring Kit is designed for Small-Block Chevy O.E Cast Iron Heads. Made of highest quality spring wire and precision wound to close tolerances. This Sure Seat Valve Spring set is for use on original equipment heads when installing...

Edelbrock part #5895 Sure Seat Valve Spring Kit is designed for Big-Block Chevy 396-402-427-454 V8 engines with O.E Cast Iron Heads. Made of highest quality spring wire and precision wound to close tolerances. This Sure Seat Valve Spring set is for use on original...

Edelbrock Part #15804 Cooling System Upgrade kit is necessary when installing Edelbrock Supercharger System #1580 or #1585 in a 2005-06 Mustang GT. This kit relocates the thermostat from the cold side of the radiator to the hot side for improved cooling. Kit contains all...

This head stud kit is required when using Edelbrock LS-R cylinder heads #770468 and #770469 on GM LSX engine blocks. Includes 10 7/16" long studs, 10 7/16" short studs, 8 5/16" exhaust studs, 10 5/16" intake flange studs, 8 5/16" valley studs, 20 7/16"...

Edelbrock Hardware Kit part #15905 includes all parts necessary to install a #1590 or #1591 Edelbrock Supercharger System on a 2010-2013 Corvette equipped with the Grand Sport trim package and a manual transmission. These vehicles have the dry sump oiling system found on the...

This Edelbrock Fuel Line Kit #8101 is temperature, gas and oil resistant. This kit is made from reinforced synthetic Chlorinated Polyethylene rubber hose with a nylon inner braid for strength. Features a -6 AN inlet fitting and a 1/8" pipe fitting with plug for...

The Edelbrock Fuel Hose Kit #8091 supplies fuel to two Edelbrock carbs when used on Edelbrock Dual-Quad manifolds. Use with a fuel hose kit such as our #8122 or #8127. 6-7/16" center-to-center, 1/8"-NPT fuel pressure port and a 3/8"-NPT fuel inlet. Attributes: Brand Name:...

The Edelbrock Fuel Hose Kit #8088 supplies fuel to two Edelbrock carbs when used on Edelbrock Dual-Quad manifolds. Use with a fuel hose kit such as our #8122 or #8127. 6-7/16" center-to-center, 1/8"-NPT fuel pressure port and a 3/8"-NPT fuel inlet. Attributes: Brand Name:...

The Edelbrock ProClassic Fuel Hose Kit #80913 supplies fuel to two Edelbrock carbs when used on Edelbrock Dual-Quad manifolds. Use with a fuel hose kit such as our #8122 or #8127. 6-7/16" center-to-center, 1/8"-NPT fuel pressure port and a 3/8"-NPT fuel inlet. Attributes: Brand...

Edelbrock #7094 Dual-Quad Progressive Linkage Kit Attributes: Brand Name: Edelbrock GTIN: 00085347070947 Quantity: Kit RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information,...

The Edelbrock Supercharger System part #15354 is designed for your 2012-14 6.4L HEMI Jeep Grand Cherokee SRT. The part #15354 kit made 471whp and 502wtq. Featuring a unique design with minimal components makes it possible to fit an Edelbrock supercharger under the stock hood....

The Edelbrock Supercharger System part #15356 is designed for your 2015 6.4L HEMI Jeep Grand Cherokee SRT. The part #15356 kit makes an excellent amount of horsepower and torque. Featuring a unique design with minimal components makes it possible to fit an Edelbrock supercharger...

The Edelbrock supercharger Stage 1 Street System part #15570 for 2015-17 Ford F-150 increases the performance of your 5.0L 4V engine to 533 horsepower and 482 ft-lbs of torque at the rear wheels when used with Edelbrock tune (kit supplied without a programmer). The...

The Edelbrock supercharger Stage 1 Street System part #1557 for 2015-17 Ford F-150 increases the performance of your 5.0L 4V engine to 533 horsepower and 482 ft-lbs of torque at the rear wheels. The core of this system is the Eaton Gen VI 2650...

Edelbrock Supercharger Stage 1 System #1517 increases the performance of your 5.7L HEMI to 483 horsepower and 450 ft-lbs of torque to the rear wheels. The core of this system is the Eaton Gen VI R2650 TVS rotating assembly with a four-lobe design with...

This 8-Rib Belt Drive Conversion Kit is for use with Edelbrock equipped 2013-2020 5.0L Mustangs. It enables the use of a wider, 8-Rib supercharger pulley instead of the standard 6-Rib design. The 8-Rib belt drive will allow customers to substantially increase boost levels by...

The Edelbrock 122 Supercharger Kit part #1551 for 1955-86 302-400 CID Small-Block Chevrolets is a positive displacement supercharger that is capable of producing 500+ horsepower on a small-block Chevy engine. This system utilizes the Eaton H122 rotor assembly for maximum efficiency in a compact...

The Edelbrock 122 Supercharger Kit part #1552 for 302-400 CID Small-Block Chevrolets with Vortec cylinder heads is a positive displacement supercharger that is capable of producing 500+ horsepower on a small-block Chevy engine. This system utilizes the Eaton H122 rotor assembly for maximum efficiency...

Edelbrock part #41144 aluminum coil covers and lid are designed for 2010-14 Camaro SS equipped with an Edelbrock supercharger part #1597 or #1598. Our kit is geared towards those with competition versions of the supercharger kits, which do not include coil covers, but would...

Edelbrock part #41113 aluminum coil covers are designed for the 2005-10 Chrysler HEMI's with an Edelbrock supercharger. Our kit is geared towards those with competition versions of the supercharger kit, which do not include coil covers, but would like to add them on. Covers...

Edelbrock part #41133 aluminum coil covers are designed for 2005-10 Mustang GT 4.6L with an Edelbrock supercharger. Our kit is geared towards those with competition versions of the supercharger kits, which do not include coil covers, but would like to add them. Covers are...