Products

The Edelbrock pulley part #15826 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference. Edelbrock pulley part #15826 is for use with any of our Professional Tuner systems. This pulley features a black anodized finish. 4.125in....

Edelbrock 3.875in. pulley part #15827 allows you to fine tune the airflow and performance of your Edelbrock C7 Corvette or Enforcer Supercharger system to your preference. The Edelbrock #15827 features a 10-rib design for use with our Edelbrock street rod and muscle car Supercharger...

The Edelbrock #3685 is a 44 pound-per-hour Fuel Injector for the ProFlo EFI Systems. It is a compact injector with a Yellow colored band. Set of 1 Injectors. Attributes: Brand Name: Edelbrock GTIN: 00085347036851 Body Type: Short Color Coded: Yellow Flow Rate: 44 Impedance:...

Edelbrock part #8087 is a -6AN x 5/8"-20 Fuel Inlet Fitting for Edelbrock Square-Bore & Carter AFB Carbs. This fuel inlet fitting is designed to replace the EPS carburetor's existing fuel inlet fitting, allowing the use of braided fuel line. Attributes: Brand Name: Edelbrock...

Edelbrock part #8080 Brass Hose Fitting is a 1/4-18" NPT fitting with a 3/8" barb. This Fitting will fit the rear vacuum port of all Edelbrock four-barrel carbs. Vehicle Specific Chrysler:Big-Block RB-Series:413 (6.8L)/426 (7.0L)/440 (7.2L) Attributes: Brand Name: Edelbrock GTIN: 00085347080809 End 1 Attachment...

The Edelbrock #3686 injectors have standard Bosch style O-ring to O-ring dimensions and are high impedance 61 lb/hr at 43.5 psi. They are a Long Body Injector for Edelbrock Pro-Tuner and ProFlo EFI Systems. Set of 1 Attributes: Brand Name: Edelbrock GTIN: 00085347036875 Flow...

Edelbrock part #624010 Twist-Lok hose end utilize barbs for hose retention. The hose end is constructed of lightweight aluminum and are 40% lighter than conventional hose ends. Twist-Lok hose ends work with any Russell AN adapter or conventional AN fittings. Attributes: Brand Name: Edelbrock...

The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage Attributes: Brand Name: Edelbrock GTIN: 00085347124008 Material: Rubber...

Edelbrock #12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage Attributes: Brand Name: Edelbrock GTIN: 00085347124015 Material: Rubber Quantity: Sold...

The Edelbrock #12605 Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165,...

The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165,...

The Edelbrock #3578 Air Temp Sensor is for push in connections. This Edelbrock #36018 Air Temp Sensor includes a rubber grommet and has a range from -40 to 284 Deg Fahrenheit. Attributes: Brand Name: Edelbrock GTIN: 00085347035786 End 1 Attachment Type: Push-On End 1...

The Edelbrock #8034 Am Throttle Cable Adapter for 79 & Later Applications this adapter plate allows the relocation of the original throttle cable. This adapter plate is required when installing a 4V carburetor on an AMC vehicle originally equipped with a 2V carburetor. Vehicle...

The Edelbrock part #9171 Automatic divorced choke rod was designed to be used with Edelbrock Intake Manifold part #2101, 2104 and 3701 with a Q-Jet carburetor. The Edelbrock 9171 Automatic Divorced Choke Rod will allow for a simple installation. Comes with a retaining clip....

The Edelbrock part #9172 Automatic divorced choke rod was designed to be used with Edelbrock Intake Manifold part #7104 with a Q-Jet carburetor. The Edelbrock 9172 Automatic Divorced Choke Rod will allow for a simple installation. Comes with a retaining clip. Vehicle Specific Chevrolet:Small-Block...

The Edelbrock part #9178 Automatic divorced choke rod was designed to be used with Edelbrock Intake Manifold part #7164 with a Q-Jet carburetor. The Edelbrock #9178 Automatic Divorced Choke Rod will allow for a simple installation. Comes with a retaining clip. Vehicle Specific Chevrolet:Big-Block...

Edelbrock part #8020 Automatic Transmission Kick Down Lever Kit is designed for use with Chevy applications using early Holley Double-Pumper carburetors. Vehicle Specific Chevrolet:Big-Block Mark IV:396 (6.5L)-502 (8.2L) Chevrolet:Small-Block Gen I:262 (4.3L)-400 (6.6L) Attributes: Brand Name: Edelbrock GTIN: 00085347080205 Quantity: Sold Individually RGL: WARNING:...

Edelbrock part #8018 Automatic Transmission Kickdown Stud is designed for use with 1982 & later TH350. This Edelbrock throttle lever stud is designed to hookup the kickdown cable to your carburetor. Attributes: Brand Name: Edelbrock GTIN: 00085347080182 Quantity: Sold Individually RGL: WARNING: This product...

Edelbrock #8003 Automatic Trans. Rod Extension Kit - for 1/4" Rod for Chrysler Vehicle Specific Chrysler:Small-Block LA-Series:273 (4.5L)/318 (5.2L)/340 (5.6L)/360 (5.9L) Chrysler:Big-Block B-Series:361 (5.9L)/383 (6.3L)/400 (6.6L) Chrysler:Big-Block RB-Series:413 (6.8L)/426 (7.0L)/440 (7.2L) Attributes: Brand Name: Edelbrock GTIN: 00085347080038 Quantity: Sold Individually RGL: WARNING: This product...

Edelbrock #8004 Automatic Trans. Rod Extension Kit - for 5/16" Rod for Chrysler Vehicle Specific Chrysler:Small-Block LA-Series:273 (4.5L)/318 (5.2L)/340 (5.6L)/360 (5.9L) Chrysler:Big-Block B-Series:361 (5.9L)/383 (6.3L)/400 (6.6L) Chrysler:Big-Block RB-Series:413 (6.8L)/426 (7.0L)/440 (7.2L) Attributes: Brand Name: Edelbrock GTIN: 00085347080045 Quantity: Sold Individually RGL: WARNING: This product...

Edelbrock #8011 Automatic Trans. Rod Extension Kit for Ford Vehicle Specific Ford:Small-Block:289 (4.7L)-351W (5.8L) Attributes: Brand Name: Edelbrock GTIN: 00085347080113 Quantity: Sold Individually RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or...

Edelbrock #8016 1/4" Ball End throttle stud Attributes: Brand Name: Edelbrock GTIN: 00085347080168 Quantity: Sold Individually RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For...

Edelbrock part #8089 Banjo Fitting is designed for Edelbrock Square-Bore & Carter AFB Carburetors. Attributes: Brand Name: Edelbrock GTIN: 00085347080892 End 1 Attachment Type: Banjo End 1 Diameter: 5/8-20 End 2 Attachment Type: Smooth Hose End 2 Size: 3/8 Finish: Natural Material: Brass Quantity:...

the exhaust features a 2.000" long fulcrum and available in 1.60:1 - 2.00:1 rocker ratios. Requires Edelbrock valve covers #4259. Vehicle Specific Chevrolet:Big-Block Race Attributes: Brand Name: Edelbrock GTIN: 00085347997534 CNC Ported: Yes Combustion Chamber Volume: 84 Construction Type: Bare Deck Thickness: 0.750 Exhaust...

This Edelbrock #81343 Black Steel Fuel Inlet for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The Edelbrock #81343 includes a black...

This Edelbrock #81263 Black Steel Fuel Inlet for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. Includes a barbed end for a...

The Bypass Actuator Kit #15001 has been developed for owners of Edelbrock-supercharged Scion FR-S, Subaru BRZ and Toyota 86 vehicles equipped with older #1556 and #15560 supercharger systems who have experienced an actuator fail or who would like to proactively replace the component before...

The Edelbrock accelerator pump assembly part #1467 is designed for use with Edelbrock Performer Series 1407 and 1411 carbs ONLY. Do NOT use with other brands. Attributes: Brand Name: Edelbrock GTIN: 00085347014675 Material: Viton® Quantity: Sold Individually RGL: WARNING: This product can expose you...

The Edelbrock accelerator pump assembly part #1468 is designed for use with Edelbrock Performer Series 1412 and 1413 carbs as well as Edelbrock 1812 and 1813 Thunder Series AVS carbs. Do NOT use with other brands Attributes: Brand Name: Edelbrock GTIN: 00085347014682 Material: Viton®...

The Edelbrock accelerator pump assembly part #1470 is designed for use with Edelbrock Performer Series 1400, 1403, 1404, 1405, 1406 EPS Carbs as well as 1801, 1802, 1803, 1804, 1805, 1806, 1825 and 1826 Thunder Series AVS carbs. Do NOT use with other brands...