Emission Control

Edelbrock part #43513 Pro-Flo Valve Cover Breather with 9mm Inlet is a small universal open element conical filter. It can be used as a valve cover breather for racing applications where the valve cover breathes out a 9mm diameter tube. The element color is...

Attributes: Brand Name: Edelbrock GTIN: 00085347435128 RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. Extended Information: Country of Origin: China...

Edelbrock part #43511 Pro-Flo Valve Cover Breather with 9mm Inlet is a small universal open element conical filter. It can be used as a valve cover breather for racing applications where the valve cover breathes out a 9mm diameter tube. The element color is...

Edelbrock part #43510 Pro-Flo Valve Cover Breather with 9mm Inlet is a small universal open element conical filter. It can be used as a valve cover breather for racing applications where the valve cover breathes out a 9mm diameter tube. The element color is...

Edelbrock part #4299 is a PVC grommet intended for 1967-1991 OEM and Edelbrock AMC/Jeep intake manifolds. Vehicle Specific 1967-1991 AMC/Jeep Attributes: Brand Name: Edelbrock GTIN: 00085347042999 Attachment Type: Push in Color: Black Inside Diameter: 0.591 in; 0.500 Material: Nitrile Rubber Outside Diameter: Flange 1.180...

Edelbrock part #42133 Billet Aluminum black powder coated push in breather fits all standard 1.25" valve cover holes. The top of the breather un-screws from the base for access to the foam insert. Breather is round and is 2.480" at the base and 2.350"...

Edelbrock part #4213 Billet Polished Aluminum push in Breather fits all standard 1.25" valve cover holes. The top of the breather un-screws from the base for access to the foam insert. Breather is round and is 2.480" at the base and 2.350" at the...

Edelbrock part #4204 Elite Series Short "Push-In" Breather is a die cast breather that will fit all existing Elite Series valve covers. The "push-in" mounting style is ideal for low-profile and center bolt Elite Series valve covers because they do not have internal clearance...

Edelbrock part #4203 Aluminum Racing Breather is a polished die-cast tall breather which can be custom mounted to any flat top surface of the valve cover. The smooth removeable lid has a traditional look. The base contains a reticulated foam element to allow gases...

Edelbrock part #4202 Elite Series Tall Breather is a top mount bolt on design which uses both the existing valve cover breather hole and two bolts for secure mounting. The lid is removable for oil fills, and the lower housing contains a reticulated foam...

Edelbrock part #4201 Elite Series Breather is a side mount bolt on design. The lid is removable for oil fills, and the lower housing contains a reticulated foam element to allow gases through while trapping oil. Ideal for Elite or Elite II valve covers....

Edelbrock part #3898 is a Ford OEM 4V EGR plate gasket for 1979-87 460 engines with intake manifold #3766 installed. Vehicle Specific Ford:Big-Block:429 (7.0L )/460 (7.5L) Attributes: Brand Name: Edelbrock GTIN: 00085347038985 Barrel Quantity: 4 Gasket Or Seal Included: Yes Gasket Type: 4-Hole Material:...

Edelbrock part #3897 is an OEM 2V replacement EGR gasket for Fords using our intake manifolds #3721, 3723, 3771, 3781, and 3783. Vehicle Specific Ford:Small-Block Windsor:302 (5.0L)/351 (5.8L) Ford:Small-Block Modified:351 (5.8L)/400 (6.6L) Attributes: Brand Name: Edelbrock GTIN: 00085347038978 Material: Steel Quantity: Sold Individually RGL:...

Edelbrock part #3896 is an OEM 4V replacement EGR gasket for Fords using our intake manifolds #3721, 3723, 3771, 3781, and 3783. Vehicle Specific Ford:Small-Block Windsor:302 (5.0L)/351 (5.8L) Ford:Small-Block Modified:351 (5.8L)/400 (6.6L) Attributes: Brand Name: Edelbrock GTIN: 00085347038961 Material: Steel Quantity: Kit RGL: WARNING:...

Edelbrock part #3827 is a 65mm 50-state street legal Mustang Throttle Body and EGR Plate for 1986-93 5.0L applications. This Edelbrock TB and EGR plate is designed to replace the stock unit when the 65mm air valve #3824 is used. It provides no performance...

The new Edelbrock 1-Bar Manifold Absolute Pressure (MAP) Sensor #36021 is designed to fit Chevrolet LS3 applications that use an Edelbrock LS3 XT intake manifold or any other factory-style intake that has a 12mm MAP sensor port hole. This 1-Bar MAP Sensor #36021 should...

The Edelbrock #36020 Pro-Tuner EFI Pressure Sensors are intended to be used with Edelbrock's Pro-Tuner EFI system, but may be used with other systems using the supplied connector and wiring. They are configurable to most aftermarket ECUs. If you are using another aftermarket ECU,...

The Edelbrock #36019 1Bar MAP Sensor is used in our #7118 Performer RPM LS1 Manifold as well as the Edelbrock E-Street, Pro-Flo 2, Pro-Flo 3 & Pro-Flo 4 Systems. Attributes: Brand Name: Edelbrock GTIN: 00085347360192 Quantity: Sold Individually RGL: WARNING: This product can expose...

The Edelbrock #36018 Throttle Position Sensor can be used on the Competition Throttle Bodies (Universal 4-barrel Throttle Bodies). The Edelbrock #36018 Throttle Position Sensor is a service item to support the Edelbrock line of throttle bodies and EFI kits. It rotates clockwise and is...

The Edelbrock #36013 is a Replacement Bosch 4-wire switching, Narrow-Band Oxygen Sensor for ProFlo2, ProFlo2/XT, and Pro-Tuner EFI Systems. Attributes: Brand Name: Edelbrock GTIN: 00085347360130 End 1 Attachment Type: Threaded End 1 Gender: Male End 2 Attachment Type: 4-Flat End 2 Gender: Female Grade...

The Edelbrock #36010 is a Replacement NTK Wide-Band Oxygen Sensor for the #3666 Pro-Flo Sportsman EFI Systems. This sensor features 5-Wire and a Square Connector Plug Attributes: Brand Name: Edelbrock GTIN: 00085347360109 End 1 Attachment Type: Threaded End 1 Gender: Male End 2 Attachment...

Edelbrock PCV Valve #3593 provide proper ventilation for your crankcase. They release the pressure that your high performance engine is creating. Attributes: Brand Name: Edelbrock GTIN: 00085347035939 End 1 Attachment Type: Hose Barb End 1 Diameter: 3/8 End 1 Gender: Male Quantity: Sold Individually...

Edelbrock PCV Valve #3592 PCV is for use with EFI systems. Suitable for low vacuum camshafts, this PCV valve opens later than most, so the PCV is not open during idle or tip-in. Attributes: Brand Name: Edelbrock GTIN: 00085347035922 End 1 Attachment Type: Hose...

The Edelbrock #3591 is a Replacement Narrow-Band Oxygen Sensor For ProFlo1 (#3500 Series) EFI Systems. It is a Bosch 3-Wire, Heated Sensor. It includes Replacement O2 Sensor and Weld-In Bung. Attributes: Brand Name: Edelbrock GTIN: 00085347035915 Connector Gender: Female Grade Type: Performance Mounting Type:...

The Edelbrock #3587 is a 1-Bar MAP sensor for use with first generation Edelbrock Pro-Flo EFI systems. Attributes: Brand Name: Edelbrock GTIN: 00085347035878 Body Material: Plastic Connector Color: Black Connector Gender: Female Connector Quantity: 1 Connector Shape: Oval Port Quantity: 1 RGL: WARNING: This...

Edelbrock part #3547 T-MAP Sensor Conversion Harness Kit is to install a single combination Inlet Air Temp (IAT) & Manifold Absolute Pressure (MAP) sensor in place of existing separate IAT and MAP sensors. Attributes: Brand Name: Edelbrock GTIN: 00085347035472 Body Material: Plastic Connector Color:...

Edelbrock part #3542 is a 2-Bar MAP sensor is an upgrade component for use with ProFlo4 boosted applications. Attributes: Brand Name: Edelbrock GTIN: 00085347035427 Body Material: Plastic Connector Color: Black Connector Gender: Male Connector Quantity: 1 Connector Shape: Oval Fitting Type: Cone Port Quantity:...

Edelbrock Part #15402 Mass airflow Sensor Kit for Ford Universal Applications, increases the airflow to 113 lbs. per minute. Both kits utilize a large 95mm venturi style housing that reduces airflow restriction and improves the overall horsepower potential. These sensors feature an injection molded...

Edelbrock Part #15401 Mass airflow Sensor Kit for GM Universal Applications, 95mm venturi style housing that reduces airflow restriction and improves the overall horsepower potential. These sensors feature an injection molded housing for OEM level precision with a modern blade-style element for the latest...

Edelbrock EGR Adapter #1476 has made installing your new intake and carburetor easier when using part #3701 and #3706. When using Edelbrock EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They're made of cast aluminum and come complete...