Emission Control

Do you have a Mustang that you use only for racing? Then why don't you get rid of the air pump? They're not needed on racing vehicles, and you will reduce the front-end weight, too. These Ford Racing smog pump eliminator bracket idlers are...

Ford Racing's push-in breather oil cap is available for open crankcase engines and will fit most Ford Racing 289/302/351W valve covers. Push-in type Closed crankcase design Attributes: Brand Name: Ford Performance Parts GTIN: 00756122122853 Extended Information: Country of Origin: US Emissions : Racing or...

Ford Racing's push-in breather oil cap is available for open crankcase engines and will fit most Ford Racing 289/302/351W valve covers. Push-in type Open crank design Attributes: Brand Name: Ford Performance Parts GTIN: 00756122122877 Extended Information: Country of Origin: US Emissions : Racing or...

Ford Racing's push-in breather oil cap is available for open crankcase engines and will fit most Ford Racing 289/302/351W valve covers. Push-in type Open crank design Attributes: Brand Name: Ford Performance Parts GTIN: 00756122122884 Extended Information: Country of Origin: US Emissions : Racing or...

This is the replacement short PCV hose for the Ford Performance Coyote air/oil separators M-6766-A50 and M-6766-A50A. Replacement Short PCV Hose Attributes: Brand Name: Ford Performance Parts GTIN: 00756122016497 Extended Information: Country of Origin: US Emissions : Emissions Compliance Exempt Life Cycle Status: Available...

This Is The Replacement Long PCV Hose For The Ford Performance Parts Coyote Air/Oil Separators M-6766-A50 And M-6766-A50A Replacement Long PCV Hose Attributes: Brand Name: Ford Performance Parts GTIN: 00756122016374 Extended Information: Country of Origin: United States Emissions : Emissions Compliance Exempt Life Cycle...

Air Breather Cap Air Breather Cap Attributes: Brand Name: Ford Performance Parts GTIN: 00756122118733 Extended Information: Country of Origin: US Emissions : 3 Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 3 x 3 x 4...

Air Breather Cap Air Breather Cap Attributes: Brand Name: Ford Performance Parts GTIN: 00756122118726 Extended Information: Country of Origin: US Emissions : Racing or Pre-Emissions Use Only Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 3...

Air Breather Cap Air Breather Cap Attributes: Brand Name: Ford Performance Parts GTIN: 00756122118719 Extended Information: Country of Origin: US Emissions : Racing or Pre-Emissions Use Only Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 4...

Air Breather Cap Air Breather Cap Attributes: Brand Name: Ford Performance Parts GTIN: 00756122118702 Extended Information: Country of Origin: TW Emissions : Racing or Pre-Emissions Use Only Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 3...

Air Breather Cap Air Breather Cap Attributes: Brand Name: Ford Performance Parts GTIN: 00756122118504 Extended Information: Country of Origin: US Emissions : Racing or Pre-Emissions Use Only Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 3...

Air Breather Cap Air Breather Cap Attributes: Brand Name: Ford Performance Parts GTIN: 00756122118498 Extended Information: Country of Origin: United States Emissions : Racing or Pre-Emissions Use Only Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension:...

This kit includes four 2 Channel Wide Band Air Fuel Ratio Units for use with an existing Data Acquisition System. Each unit is compact, fully encapsulated and waterproof. These units do not include an LED display or any internal data logging capability. The system...

The Edelbrock #91172 Weld-In Oxygen Sensor Bung is for All Edelbrock Pro-Flo EFI Systems, E-Street EFI, QwikData 2, or any application requiring an Oxygen Sensor installed in the Exhaust system. This part is machined from steel stock with an 18 x 1.5mm internal thread....

The Edelbrock #91171 Wide-Band Oxygen Sensor is a replacement Sensor for use with Edelbrock #91170 2-Channel Wide Band Air Fuel Ratio Monitor and Edelbrock #3532 Wide Band Air Fuel Ratio Monitor. Includes a Bosch LSU 4.2 Sensor with square connector for Edelbrock 2 and...

The Edelbrock #91170 is a 2-Channel Wide Band Air Fuel Ratio Monitor Kit. This kit features a compact, fully encapsulated waterproof Amplifier unit specifically for use with Data Acquisition or Engine Management Systems. These units do not include an LED display or any internal...

Edelbrock part #8096 Vacuum Adapter Fitting is a low profile elbow that is designed to provide clearance for Holley and other carbs with a rear fuel bowl that extends over the vacuum port tap in most intake manifolds. Machined from solid brass. Attributes: Brand...

One pair of valve cover PCV grommets. Fits standard 1-1/4" diameter valve cover holes. The i.d. is .75" to fit many common PCV valves. The rubber durometer was chosen to give a firm snug leak free fit. Attributes: Brand Name: Edelbrock GTIN: 00085347080946 Attachment...

Edelbrock part #8057 is a 1" tall Ford 2V EGR adapter plate kit. Includes mounting hardware. Vehicle Specific Ford:Small-Block:302 (5.0L)-351W (5.8L) Attributes: Brand Name: Edelbrock GTIN: 00085347080571 Barrel Quantity: 2 Gasket Or Seal Included: Yes Gasket Type: Divided Center Material: Aluminum Mounting Hardware Included:...

3/8" - 1 - Flat Washer Vehicle Specific Ford:Small-Block:302 (5.0L)-351W (5.8L) Attributes: Brand Name: Edelbrock GTIN: 00085347080533 Barrel Quantity: 4 Gasket Or Seal Included: Yes Gasket Type: Divided Center Material: Aluminum Mounting Hardware Included: Yes Quantity: Kit RGL: WARNING: This product can expose you...

Edelbrock EGR Adapter #8035 has made installing your new intake and carburetor easier when using intake manifold #3701 on 1973-74 SBC engines. With Edelbrock EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They're made of cast aluminum and...

Edelbrock part #8025 is an EGR supply tube spacer for Ford Performer RPM II EFI intake manifold #7123. On 1994-1995 Ford Mustangs EGR is fed to the intake by means of a tube running from the rear of the exhaust manifold to the EGR...

Edelbrock EGR Adapter #8017 has made installing your new intake and carburetor easier on Ford 4V applications. When using Edelbrock EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They're made of cast aluminum and come complete with gaskets...

Edelbrock part #4420 Circle Track Breather is a push-in style breather with the open element breather. The washable cotton gauze element is capped with a beautiful chromed metal piece with embossed Edelbrock script. Attributes: Brand Name: Edelbrock GTIN: 00085347044207 Family: Victor Filter Media Color:...

Edelbrock part #4413 Round Breather with 90 deg. PCV Port is a traditional steel one-piece push in breather. The black mini texture powder coat finish matches our black valve covers. Includes a hose nipple mounted horizontally (90 deg.) for air cleaner or in-line PCV...

Edelbrock part #4410 Round Breather with 90 deg. PCV Port is a traditional steel one-piece push in breather. The bright chrome finish matches our Signature Series valve covers. Includes a hose nipple mounted horizontally (90 Deg ) for air cleaner or in-line PCV applications....

Edelbrock part #4407 Billet Polished Aluminum Breather with 90 deg. PCV port which looks like a traditional breather for standard 1.250" valve cover holes. The breather housing has an internal PCV with a 90 deg. port to attach a hose. This breather is round...

Edelbrock part #4406 Billet Aluminum Breather with 90 deg. PCV port which looks like a traditional breather for standard 1.250" valve cover holes. The breather housing has an internal PCV with a 90 deg. port to attach a hose. This breather is round and...

Edelbrock part #4405 Valve Cover Breather is a traditional steel one-piece push in design. The bright chrome finish matches our Signature Series valve covers. Attributes: Brand Name: Edelbrock GTIN: 00085347044054 Family: Pro-Flo Filter Media Color: Black Filter Media Material: Foam Height: 1.75 Housing Color:...

Edelbrock part #4403 Valve Cover Breather is a traditional steel one-piece push in design. It is finished with a black mini texture powder coat to match our black valve covers. Attributes: Brand Name: Edelbrock GTIN: 00085347044030 Family: Pro-Flo Filter Media Color: Black Filter Media...