Adams Driveshaft JL-1350F-S-D60ULT - JL Front 1350 Solid CV Driveshaft 2 or 4 Door with Ult 60s Adams Driveshaft

This Extreme Duty Series Solid 1350 CV Driveshaft will work up to 42 inch Tall Tires. Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the right driveshaft for your Jeep. This Driveshaft will work up to a 4 inch Lift after that the angle may be too Severe or it may Bind.

We will need a Center of u-joint to Center of u-joint Measurement like the picture belows shows. Must be measured on the ground at ride height. If you have coil overs then we would need a Collapse, Ride Height, and Full Extension Measurement. You could use the measurement chart below to get the measurement.

Benefits for Buying an Adams Driveshaft:

• Front Driveshaft Part Number ASDJL-1350F-S-D60ULT
• Made out of 2 inch X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
• Has Long Full Spline Slip n Stub unlike some of our Competitors.
• Built only with Components made by Adams Forged Parts, Spicer and Neapco.
• Has the Strongest Solid Non Greasable U-joints on the Market. You Break the U-joint we replace it.
• Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite. Our Competitors use grade 8.
• Driveshafts come painted Gloss Black Show Quality.

This Item will include the following parts:

• (1) 2 inch X .120 Wall Extreme Duty 1350 CV Driveshaft with Solid Non Greasable U-joints, with a OEM Style Flange. Lifetime Warranty if you twist our tube, break a weld, or break a U-joint in half due to Torque.
• (1) American Made Front 1350 Half Round Transfer Case Output Shaft Yoke.
• (4) Grade 10 CV bolts.
• (1) Adams Driveshaft T-shirt

Notes:

• Due to Jeep changing their angles on the JT and JL Models, if you install an After Market Differential and the driveshaft spins full-time, it may result in a vibration and/or premature U-joint and CV failure due to angles.
• Must Have a 1350 Pinion Yoke On The Differential.

Application:

• Fits A 2018 - Present Jeep JL Wrangler 2 Or 4 Door Rubicon - Sahara- Sport Models

Warranty

Welds and Tubing-Limited Lifetime Warranty, Other Components-One Year Warranty

Specifications