Holley 0-82951SA Aluminum Street HP Carburetor 950 CFM 4150 Mechanical Secondaries Shiny Gasoline

Tire smoking performance has never been so affordable! The all new Aluminum Street HPs weigh up to 40 percent less and are even easier on your wallet.

Holley is proud to introduce the all new Aluminum Street Hptm. They utilize the best features from Holley's Race Bred 4150 Hptm carbs, but are tamed for street and light competition use.

The Street HP features an aluminum contoured main body design taken from the race winning 4150 Hptm and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response, drivability and maximum performance.

The Aluminum Street HP takes all the great features from the race bred HP and the Double Pumper and combines them into the perfect street/strip carburetor.

Features and Benefits:

• Aluminum construction for weight savings and long lasting good looks Optimized street/strip calibration for outstanding throttle response and drivability Contoured venturi inlet offers balanced airflow for increased horsepower Screw in air bleeds for precision tuning capabilities Four corner idle for precise idle control Mechanical secondaries for awesome tire turning performance Dual accelerator pumps for additional fuel under initial acceleration Dual feed fuel inlets for constant high volume fuel delivery Available in 650, 750, 850, and 950 CFM versions Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing 100 percent wet-flow tested by Holley technicians to assure it arrives ready to run! Compatible with GM, Chrysler, and Ford A/T kickdown linkage
• Additional parts may be required.

Associated Comments:

• This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter Afb, and Autolite style carburetors with 5 3/16 inch x 5 5/8 inch bolt pattern.
• If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr.
• Gasket #1932.

Details:

• Barrel Quantity: 4.0
• Body Color: Polished
• Body Finish: Polished
• Booster: Downleg
• Booster Design: Downleg
• CFM: 950.0
• Carburetor Material: Aluminum
• Carburetor Use: Performance and Race
• Condition: New
• Cubic Feet Per Minute Rating: 950.0
• Finish: Shiny
• Flange Type: Square/4150
• Fuel Type: Gasoline
• Grade Type: Performance
• Linkage Attached: Yes
• Marine Approved: No
• Marine Use: No
• Material: Aluminum
• Model: 4150
• Mounting Hole Quantity: 4.0
• Primary Jet Diameter: 84.0
• Primary Main Jet: 84.0
• Primary Power Valve: 4.5
• Primary Pump Nozzle Size: 31.0
• Secondaries: Mechanical
• Secondary Main Jet: 84.0
• Secondary Pump Nozzle Size: 31.0
• Spacer Included: No
• Supercharged Application: No
• Throttle Bore: 1.750 inch
• Venturii Size: 1.563 inch
• Warranty: Manufacturer's Limited 90 Day Warranty

Installation Guide: Download PDF

Installation / Product Video: Watch on YouTube

⚠️ California Proposition 65 Warning
California Residents: This product can expose you to chemicals which are known to the State of California to cause cancer or other reproductive harm. Please visit www.p65warnings.ca.gov for more information.